Ready to Use a Propane Buffer on Your Floors? Stay Safe by Following These Tips
Giving your floors that squeaky clean polish is really easy when you have a reliable propane buffer. Some buffer models are even fitted with squeegees that will gather any moisture or dirt left behind.
If you want to be more practical and cost-friendly about maintaining your floors, a buffer certainly makes for a good investment. Go for a propane buffer when polishing large areas where your access to electrical outlets may pose a challenge.
There are a number of things that you can do be able to buff your floors safely.
Conduct Your Pre-Use Activities First
Especially when you are using the buffer for the first time, it’s important to learn everything that you can about operating the machine first. Take a moment to read and study the operator’s manual. These manuals outline safety precautions you need to follow.
Put on Your Safety Equipment
You need to be properly equipped for a buffing job. That includes wearing slip-resistant boots or shoes as well as some long pants. Put on splash goggles and gloves when you are mixing and dispensing cleaning chemicals. Finally, keep safety glasses on while you are buffing to protect your eyes from any debris that may be kicked up by rotating brushes and pads.
Practice Operating Precautions Always
Always maintain a good grip on the handles so that you are always in full control of the buffer. Be constantly aware of your surroundings as you buff the floor. Avoid hitting anyone or anything in your area, such as doors and glass windows. While you’re buffing, pay close attention to any stairs or inclined surfaces around you so that you don’t accidentally back into them.
It would be best to schedule any floor maintenance activities during hours when foot traffic in the area is relatively low. This is usually in the early morning, late evening or weekend. This way, there is less chance of anyone slipping from wet, buffed floors.
Store the Buffer Properly After Each Use
Once you are done, store the buffer out of everyone’s way to avoid causing a trip hazard. Just make sure that it’s turned off before you do.
Follow all of these tips and you should have no problem operating your buffer safely. You get to keep your floors polished and avoid any serious injuries at the same time. Now, that’s what you can call a win-win!